粉末冶金法制备混杂增强铜基复合材料的增强体竞争析出行为研究

Copper matrix composites reinforced by in situ-formed hybrid titanium boride whiskers (TiB_w) and titanium diboride particles (TiB_2p) were fabricated by powder metallurgy. Microstructural observations showed competitive precipitation behavior between TiB_w and TiB_2p, where the relative contents of the two reinforcements varied with sintering temperature. Based on thermodynamic and kinetic assessments, the precipitation mechanisms of the hybrid reinforcements were discussed, and the formation of both TiB_w and TiB_2p from the local melting zone was thermodynamically favored. The precipitation kinetics were mainly controlled by a solid-state diffusion of B atoms. By forming a compact compound layer, in situ reactions were divided into two stages, where Zener growth and Dybkov growth prevailed, respectively. Accordingly, the competitive precipitation behavior was attributed to the transition of the growth model during the reaction process.     

Synergetic effect of multiple phases on hydrogen desorption kinetics and cycle durability in ball milled MgH2–PrF3–Al–Ni composite

A new MgH₂–PrF₃–Al–Ni composite was prepared by ball milling under hydrogen atmosphere. After initial dehydrogenation and rehydrogenation, Pr₃Al₁₁, MgF₂, PrH₃ and Mg₂NiH₄ nanoparticles formed accompanying the main phase MgH₂. The hydrogen absorption-desorption properties were measured by using a Sieverts-type apparatus. The results showed that the MgH₂–PrF₃–Al–Ni composite improved cycle stability and enhanced hydrogen desorption kinetics. The improvement of hydrogen absorption-desorption properties is ascribed to the synergetic effect of the in situ formed Pr₃Al₁₁, MgF₂, PrH₃ and Mg₂NiH₄ nanoparticles. This work provides an important inspiration for the improvement of hydrogen storage properties in Mg-based materials.     

丙酸盐对厌氧氨氧化除氮性能及群落结构的影响

为了探究有机碳对厌氧氨氧化的长期影响, 向厌氧氨氧化膜生物反应器中添加不同浓度的丙酸钠, 研究对反应器的除氮效能以及微生物的种群结构和功能变化。结果表明: 反应器主要的脱氮过程由CandidatusBrocadia完成, 当丙酸钠浓度为100 mg/L时, 反应器中由于异养细菌的生长, 可实现碳氮的同步去除, 平均总氮去除率可达91.9%。当丙酸钠浓度为200 mg/L 时, 对Candidatus Brocadia的抑制作用导致反应器除氮性能下降, Candidatus Brocadia的丰度降至41.2%, 总氮去除率降至 78.8%。在有机碳抑制作用解除后, 反应器的除氮性能恢复为86.8%, Candidatus Brocadia丰度增加到54.0%, 但群落多样性下降, 属水平的微生物组成有较大的改变。     

FeCo-based hybrid MOF derived active species for effective oxygen evolution

Metal-organic frameworks(MOFs) have been regarded as promising catalyst materials due to the richness of coordinately unsaturated metal sites on the surface,which can act as catalytic active centres.In this study,a hybrid MOF material composed of Fe-based MOF and Co-based MOF was prepared with the involvement of graphene oxide nanosheets as additive.It was demonstrated that the hybrid MOF materials showed much higher electro-catalytic activity towards oxygen evolution than the single-phase counterparts.To drive current density of 10 mA cm~(-2),the hybrid CoFe-based MOF only needed an over potential of 290 mV in 1 M KOH.The catalytic activity could sustain for a longer time with only slight current density decrease.During oxygen evolution operation,the MOF catalyst evolved into catalytic active species but kept well the microscale sheet-like structure.It is thus believed that this study will provide an avenue for the development of advanced electrocatalysts.     

Acyl-chloride functionalized graphene oxide chemically grafted with hindered phenol and its application in anti-degradation of polypropylene

In this study,graphene oxide (GO) nanosheets were first functionalized by the acyl-chloride reaction and then reacted with hindered phenol (HP) to obtain HP grafted GO (GO-g-HP).The GO-g-HP prepared under the optimized condition exhibited a high efficiency against both thermal and photo oxidation of isotactic polypropylene (iPP).GO-g-HP exhibited a much better anti-aging efficiency than that of HP and GO used individually or that of their physical mixture.The outstanding anti-aging effect of GO-g-HP was attributed to the excellent synergistic effect produced between the chemically bonded GO and HP,which resulted in an improved oxygen barrier property of GO and excellent utilization of the free radical scavenging capability of GO and HP.Also,thanks to the grafting of HP on GO,the physical loss of HP,which was one of the main shortcomings for traditional small molecular antioxidants,was largely suppressed.It is expected that the GO-g-HP prepared can well meet the requirement of long-term applications of polymers in some harsh service conditions.     

分子水氧化催化剂及其光电催化分解水研究进展

 总结了近年来基于不同第一过渡系列金属的分子水氧化催化剂，包括贵金属分子水氧化催化剂和非金属分子水氧化催化剂；以及常用的氧化物半导体电极材料，例如α-Fe₂O₃、WO₃和BiVO₄等。概述了目前分子水氧化催化剂在电极表面的负载方式，包括物理吸附方式、共价键结合方式、分子催化剂修饰吸附基团方式、静电作用和π-π堆积作用等。提出构建高效稳定的光致水分解分子器件需要解决的问题，从而实现利用太阳能大规模裂解水制备清洁能源的设想。     

Nb在现代铁素体不锈钢中的应用研究进展

Nb元素越来越多地被应用于铁素体不锈钢中以提高其性能。本文综述了Nb对铁素体不锈钢强度、韧性、耐腐蚀、抗高温氧化等性能影响的研究进展,以及国内外含Nb铁素体不锈钢在汽车、建筑、家用电器等领域中的应用现状。分析了目前我国含Nb高性能铁素体不锈钢研发中存在的主要问题,认为我国未来应重点研究新型超临界温度的含Nb耐热不锈钢等高端装备制造材料,以促进含Nb高性能铁素体不锈钢的研发和生产,改善我国不锈钢的品种结构。     

高铟闪锌矿在氧压酸浸中铟浸出动力学的研究

铟是一种重要的多用途战略金属,具有较高的工业应用价值,但无独立可供开采的矿床,常伴生于铅锌等硫化矿中.因此,本文在传统电加热条件下进行了高铟闪锌矿氧压酸浸过程中铟浸出动力学实验的研究.结果表明:采用“有固态产物层的液-固相浸出反应动力学模型”对铟浸出动力学进行了研究,可知其浸出速率受到界面化学反应控制,其表观活化能为69.735kJ/mol,以及高铟闪锌矿氧压酸浸过程中铟浸出率随粒度减小、初始酸度增大、氧分压增大、浸出温度增大而增大.     

加工工艺对鸡酥松脂肪氧化的影响

为研究加工工艺对鸡酥松加工过程脂肪氧化的影响,考察蒸煮时间、蒸煮温度、炒松时间对2-硫代巴比妥酸值的影响,分析炒松工艺对鸡酥松脂肪氧化以及综合评分的影响,结果表明,炒松时间显著影响脂肪氧化,加工工艺中对脂肪氧化影响程度由大到小依次为炒松时间、蒸煮温度和初煮时间,而影响产品综合评估得分的因素由强至弱依次为炒松时间、初煮时间和蒸煮温度;优化后较适的加工工艺条件为初煮50min、复煮10min、蒸煮温度90℃、炒松时间20min、2-硫代巴比妥酸作用底物值为2.26mg/kg。产品综合评分与2-硫代巴比妥酸作用底物值的趋势并不完全吻合,鸡酥松加工过程中的工艺影响脂肪氧化程度和产品品质。     

多壁碳纳米管氧化改性及其对酚类吸附性能的研究

针对目前有机废水(尤其是酚类废水)污染严重的问题, 通过混酸氧化法对多壁碳纳米管(multi-walledcarbon nanotubes, MWCNTs)进行氧化改性(MWCNT-O), 并研究其改性前后对苯酚、对甲苯酚、对甲氧基苯酚、对羟基苯甲醛和对硝基苯酚5种典型酚的吸附作用。结果表明: 298 K下, 与未改性的MWCNTs相比,MWCNTs-O对5种酚类物质的吸附量均有提升。5种酚类物质在MWCNTs-O表面的吸附量有差别, 顺序为对硝基苯酚>对甲氧基苯酚>对羟基苯甲醛>对甲苯酚>苯酚。吸附过程符合Langmuir吸附等温方程, 主要为单分子层化学吸附。对MWCNTs-O进行表面官能团测试、透射电镜分析和拉曼光谱分析, 发现氧化改性后材料表面的酸性含氧官能团增多, 缠绕度降低, 整体分散性增强, 石墨化程度有所提升。通过研究分子结构与吸附量之间的关系, 发现吸附量与酚类物质的电子能量(electronic energy, EE)有显著的相关性, MWCNTs-O表面垂直的π电子和酚类物质的π电子形成π-π共轭作用。因此, EE 可以作为酚类物质在MWCNTs-O表面平衡吸附量的预测性指标。